Added to Cart
    You have items in your cart
    You have 1 item in your cart
      Total
      Check Out Continue Shopping

      Swapping Your Hardware

      Tools/What You Need: 

      1. Your new Hapny hardware + the required screws (included)
      2. A screwdriver
      3. 2 minutes 
      4. Your favorite song. Maybe two to be safe.

      Replacing a knob:

      1. Grab your new favorite Hapny knob <hyperlink>
      2. Unscrew your existing knob. Use the screwdriver to loosen the screw from the inside of your door/drawer vs twisting the knob directly. Directly twisting it might cause the screw insert to come loose, which wouldn’t be good for anyone.
      3. Screw in your new knob. Remember to use the screwdriver to tighten the screw from the inside of your door/drawer vs twisting the knob directly to tighten.
        1. Our hardware comes with 1” screws, which fit almost all standard doors and drawers. If you need a longer screw, check out your local home improvement store. 
      4. Safely store your old knob + screw for a rainy day (or for when you move out). 
      5. Enjoy your new vibe! And send us a pic so we can enjoy with you @hapnyhome

      Replacing a pull:

      Before you start: Measure the center-to-center distance of your current pulls. You want to make sure you find a Hapny pull <hyperlink> with the same dimensions so you don’t have to drill new holes. If you do need to drill new holes though, we got you <hyperlink to installing guide>. Need to explain/visualize cc somewhere

      (pull length = cc); can also measure the holes on your cabinet 

      1. Grab your new favorite Hapny pull <hyperlink>.
      2. Unscrew your existing pull. Use the screwdriver to loosen the screws from the inside of your door/drawer vs grabbing the pull directly. Directly grabbing or twisting it might cause the screw inserts to come loose, which wouldn’t be good for anyone.
      3. Screw in your new pull. Remember to use the screwdriver to tighten the screws from the inside of your door/drawer vs twisting the pull directly to tighten.
        1. Our hardware comes with 1” screws, which fit almost all standard doors and drawers. If you need a longer screw, check out your local home improvement store. 
      4. Safely store your old pull + screws for a rainy day (or for when you move out). 
      5. Enjoy your new vibe! And send us a pic so we can enjoy with you @hapnyhome